Laying guide

färdigblandad-microcement

THERE ARE MORE VIDEOS FURTHER DOWN THE PAGE

APPLY MICROCEMENT

Prima betongen / underlaget

Priming

After inspecting the surfaces, you roll on K-primer, it contains sand.

This is to create a good attachment base. The sand makes the surface feel like sandpaper and that makes laying a lot easier. without the sand, the material would just slide with the laying tool.

Här läggs microcementen Vitruvius PRO.

LAYING

The mixed mass is pressed onto the surface, much like spreading butter on a sandwich.

As you push the concrete against the substrate and thus have the support of the substrate, it is easier to get it even. But it doesn't have to be 100% even, because you can correct quite a lot in the grinding moments.

Slipa microcement

GRINDING

The day after laying, Vitruivus is sanded. It takes place without special machines

After approx. 15 – 20 hours, the microcement is hard enough to be sanded. You can sand ordinary sandpaper. If you wait longer, you need to grind with diamond pads.

fläckskydda microcementen

SEALING

After sanding, the sealer is mopped on in 2-3 thin layers.

When the Sealer has dried, adjustments can be made if necessary and mistakes from the laying can be corrected.

Furnishing can take place after 24 hours.

 

MIX THE MICROCEMENT VITRUVIUS PRO

CONCRETE COUNTERS IN KITCHEN

LAYING OF FLOORS

PREPARATION OF TILES

 
provbitspaket

Please visit our social media for more pictures….

INSTAGRAM

FACEBOOK

PINTEREST

https://www.pinterest.se/designbycement